No Products in the Cart
Germany Store
France Store
2000w pure sine wave inverter with 80A charger. Allows the conversion of a voltage of 12V DC (direct voltage) to a voltage of 220V-240V AC (alternating voltage).
Present a quality inverter with compact dimensions and low weight, which can easily produce any effect.
This allows you to easily power electrical consumers such as coffee machines, DIY equipment, pumps, motors, refrigerators, compressors, air conditioners, hair dryers, televisions or laptops when traveling.
| Wave Type | Pure Sine Wave | Voltage | 12V to 220-240Vac |
| Continuous Power | 2000 W | Max. Charging Current | 80 A |
| Peak Power | 4000 W | Mains Priority Mode | Yes |
| With DC Cable | Yes. 35 mm² / 70 cm / Continuous current ≥175 A | ||
| Efficiency | >87 % | Direct current connection (DC) | M8 threaded bolt |
| Frequency | 50Hz / 60Hz | Dimension (L x B x H) |
388 x 287 x 110 mm |
| No-load consumption | about 3,5 A | Net Weight | 6,40 KG |
Inverters with residual current circuit breakers are safer: If someone is electrocuted or the leakage current of the power grid exceeds the specified value, the residual current circuit breaker can cut off the power supply in a very short time to protect the safety of people and electrical appliances, and it has the function of overload protection and short-circuit protection.
RCD parameters:
Rated current: 16A
Rated residual current: 30mA
Breaking time: t＜0.1s
The charging current can be set via the Wired Remote Control Panel.
Please note: Default charging current = 40 A. You can adjust the charging current according to the Wired Remote Control Panel.
Thanks to the powerful heat dissipation ability of the fan and the reliable hardware equipment.
The inverter can work continuously with a load of 2000 W.
The Wired Remote Control Panel is connected to the remote port of the inverter and you can view data and set parameters. For example: set battery type, charging voltage, charging current, etc. (cable length: 7000 mm)
For detailed information on operation, please refer to the user manual or contact us.
Adjust the fan speed according to the temperature.
Very suitable for night-time charging in motorhomes. (Recommended charging current: 20 A - 40 A).
Integrated mains priority circuit:
This 12V/240V inverter features Mains Priority Mode - automatically prioritising grid power supply when available, while intelligently maintaining battery backup for seamless transition during power outages.
Connect the AC INPUT on the inverter to a 240V power socket. At this time, the inverter will give priority to using 240V AC power and power the device through 240V AC power (rather than the battery) to save battery energy.
Uninterruptable Power Supply (UPS):
The built-in AC transfer switch performs the function of an Uninterruptable Power Supply (UPS). In the event of a grid failure, the inverter is automatically activated and takes over AC supply to the connected loads. This happens in less then 20 milliseconds and ensures that sensitive connected equipment continues to run without disruption. This feature can be deactivated if not required.
We do not recommend integrating the AC OUTPUT of the inverter into the 240V distribution board of the campervan, there is a higher risk of damage to the inverter. We do not offer after-sales service for serious damage due to incorrect wiring.
WARNING 01: If you integrate the AC OUTPUT into the 240V distribution board of the campervan (i.e. the socket on the campervan is integrated into the inverter), the AC INPUT can only be connected to an external power supply (shore power supply) socket, and not to the power socket on the campervan, as this will result in the formation of a loop between the AC INPUT and the AC OUTPUT, which could cause damage to the inverter!
WARNING 02: If you connect the AC INPUT to a power socket on the campervan, the AC OUTPUT socket can only be connected to 240V appliances/devices, and it is forbidden for the AC OUTPUT socket to be integrated into the 240V distribution board of the campervan.
For further questions please contact us directly.
Accessories include: Inverter Cable, Wired Remote Control Panel.
All cables are designed to the highest standards: Inverter cable: 35 mm², 70 cm, continuous current 175 A, power ≥ 2240 watts.
• 1x 2000W Pure Sine Wave Power Inverter
• 2x DC Cables 0.7 meter
• 1x Wired Remote Control Panel 7.0 meter
• 1x User Manual
